Hello
I have a Legion GO with Lenovo’s WIN 11 installed on the internal 512 GB SSD and I’ve wanted to install Bazzite on my new external SSD.
The external SSD is hooked up to the Legion with a Adata ec700g and the ssd is a Kingstone NV3 1TB.
The steps that I’ve followed are:
1: Downloaded bazzite-deck for legion go with KDE environment.
2: Disabled secure boot
3: Booted into bazzite install, selected the SSD → Automatic partition → Delete all → Set the corect date and time as my bios → BEGIN INSTALL
4: Started to install, waited around ~15 min, rebooted → Enroll MOK → password universalblue → Reboot
5: Updating kargs
6: Here is the problem, after updating kargs it reboots then the screen goes black and hangs there…
7: Tried again reboot added “nomodeset amdgpu.dc=0” to launch, it started and loaded into bazzite but the gray screen appeared and 3 points in the top left, hangs about ~5 min then reboot, then black screen appears and in the top left a small underline appears and stays there… then nothing it just hangs in there.